How do I activate the scrambler?

All Scramblers are factory set to the off Position:

For The Judge, C495, and C475 

1.To turn the scrambler on/off 1. Press and hold the Menu button approximately 3-5 seconds or until “MENU” is displayed. Note: If no button is pressed for approximately 10 seconds the unit will automatically “Exit” the Menu mode.

2. Press the Menu button in increments until “Scrambler” is displayed

3. Press the Mute or City button to turn scrambler on/off.

If the scrambler is on, “Scrambler Test” will be displayed in the startup sequence. When the unit’s scrambler setting is set to be off, then “Scrambler off” will be displayed in the startup sequence. During the startup sequence the current menu settings are displayed. If “Self-Test mode” setting is de-activated the unit will only show current settings on the display at startup.

For The Phantom-T, C435, C450

1. To turn the scrambler on/off, power off the unit.

2. Press and hold the City button down while turning power back on the unit.

If the scrambler is on, the “T” LED light will be included in the start up sequence. If the scrambler is off, the “T” LED light will not be included in the start up sequence. The “T” LED light is the test diagnostics for the scrambler.